ans..30

MerchantID, assigned by Computop. Additionally this parameter has to be passed in plain language too.

ans..64

Amount in the smallest currency unit (e.g. EUR Cent). Please contact the Computop Helpdesk, if you want to capture amounts <100 (smallest currency unit).

a3

Currency, three letters DIN / ISO 4217, e.g. EUR, USD, GBP. Please find an overview here: A1 Currency table

an64

ans..1024

If specified at request, Paygate forwards the parameter with the payment result to the shop.

ans..32

To avoid double payments or actions (e.g. by ETM), enter an alphanumeric value which identifies your transaction and may be assigned only once. If the transaction or action is submitted again with the same ReqID, Computop Paygate will not carry out the payment or new action, but will just return the status of the original transaction or action.

Please note that the Computop Paygate must have a finalized transaction status for the first initial action (authentication/authorisation). This does not apply to 3-D Secure authentications that are terminated by a timeout. The 3-D Secure Timeout status does not count as a completed status in which the ReqID functionality on Paygate does not take effect. Submissions with identical ReqID for an open status will be processed regularly.

Notice: Please note that a ReqID is only valid for 12 month, then it gets deleted at the Paygate.

ans..256

Complete URL which calls up Paygate if payment has been successful. The URL may be called up only via port 443. This URL may not contain parameters: In order to exchange values between Paygate and shop, please use the parameter UserData.

Common notes:

• We recommend to use parameter "response=encrypt" to get an encrypted response by Paygate
• However, fraudster may just copy the encrypted DATA-element which are sent to URLFailure and send the DATA to URLSuccess. Therefore ensure to check the "code"-value which indicates success/failure of the action. Only a result of "code=00000000" should be considered successful.

ans..256

Complete URL which calls up Paygate if payment has been unsuccessful. The URL may be called up only via port 443. This URL may not contain parameters: In order to exchange values between Paygate and shop, please use the parameter UserData.

Common notes:

• We recommend to use parameter "response=encrypt" to get an encrypted response by Paygate
• However, fraudster may just copy the encrypted DATA-element which are sent to URLFailure and send the DATA to URLSuccess/URLNotify. Therefore ensure to check the "code"-value which indicates success/failure of the action. Only a result of "code=00000000" should be considered successful.

a7

Status response sent by Paygate to URLSuccess and URLFailure, should be encrypted. For this purpose, transmit Response=encrypt parameter.

ans..256

Complete URL which Paygate calls up in order to notify the shop about the payment result. The URL may be called up only via port 443. It may not contain parameters: Use the UserData parameter instead.

Common notes:

• Before follow-up actions (capture / credit / reversal) are carried out on an existing transaction, the first Notify must have been answered by the shop.
• Fraudster may just copy the encrypted DATA-element which are sent to URLFailure and send the DATA to URLSuccess/URLNotify. Therefore ensure to check the "code"-value which indicates success/failure of the action. Only a result of "code=00000000" should be considered successful.

ans..50

A single value to be set by the merchant to return some information unencrypted in response/notify, e.g. the MID. 

"Plain"-parameter is part of encrypted "Data" in Computop Paygate and therefore protected against manipulation. 

"Custom"-parameter is added to the request data before encryption and is part of encrypted "Data" in Computop Paygate request. By this they are protected against manipulation by a consumer. 

The Custom-value is added to the Computop Paygate response in plain text and the "|" is replaced by a "&". By this you can put a single value into Custom-parameter and get multiple key-value-pairs back in response for your own purpose.

ans..30

MerchantID, assigned by Computop

an32

ID assigned by Paygate for the payment, e.g. for referencing in batch files as well as for capture or credit request.

an32

ID for all single transactions (authorisation, capture, credit note) for one payment assigned by Paygate

ans..64

a..50

OK or AUTHORIZE_REQUEST (URLSuccess) as well as FAILED (URLFailure)

ans..1024

an8

Error code according to Paygate Response Codes (A4 Error codes)

an64

ans..1024

If specified at request, Paygate forwards the parameter with the payment result to the shop.

ans..50

A single value to be set by the merchant to return some information unencrypted in response/notify, e.g. the MID. 

"Plain"-parameter is part of encrypted "Data" in Computop Paygate and therefore protected against manipulation. 

"Custom"-parameter is added to the request data before encryption and is part of encrypted "Data" in Computop Paygate request. By this they are protected against manipulation by a consumer. 

The Custom-value is added to the Computop Paygate response in plain text and the "|" is replaced by a "&". By this you can put a single value into Custom-parameter and get multiple key-value-pairs back in response for your own purpose.

ans..30

MerchantID, assigned by Computop. Additionally this parameter has to be passed in plain language too.

an32

ID assigned by Paygate for the payment to be captured

ans..64

Amount in the smallest currency unit (e.g. EUR Cent). Please contact the Computop Helpdesk, if you want to capture amounts <100 (smallest currency unit).

a3

Currency, three letters DIN / ISO 4217, e.g. EUR, USD, GBP. Please find an overview here: A1 Currency table

an64

ans..32

To avoid double payments or actions (e.g. by ETM), enter an alphanumeric value which identifies your transaction and may be assigned only once. If the transaction or action is submitted again with the same ReqID, Computop Paygate will not carry out the payment or new action, but will just return the status of the original transaction or action.

Please note that the Computop Paygate must have a finalized transaction status for the first initial action (authentication/authorisation). This does not apply to 3-D Secure authentications that are terminated by a timeout. The 3-D Secure Timeout status does not count as a completed status in which the ReqID functionality on Paygate does not take effect. Submissions with identical ReqID for an open status will be processed regularly.

Notice: Please note that a ReqID is only valid for 12 month, then it gets deleted at the Paygate.

ans..30

MerchantID, assigned by Computop

an32

ID assigned by Paygate for the payment, e.g. for referencing in batch files as well as for capture or credit request.

an32

ID for all single transactions (authorisation, capture, credit note) for one payment assigned by Paygate

ans..64

a..50

OK (URLSuccess) or FAILED (URLFailure)

ans..1024

an8

Error code according to Paygate Response Codes (A4 Error codes)

ans..30

MerchantID, assigned by Computop. Additionally this parameter has to be passed in plain language too.

an32

ID assigned by Paygate for the payment to be reversed

ans..64

Amount in the smallest currency unit (e.g. EUR Cent). Please contact the Computop Helpdesk, if you want to capture amounts <100 (smallest currency unit).

a3

Currency, three letters DIN / ISO 4217, e.g. EUR, USD, GBP. Please find an overview here: A1 Currency table

an64

ans..1024

If specified at request, Paygate forwards the parameter with the payment result to the shop.

ans..32

To avoid double payments or actions (e.g. by ETM), enter an alphanumeric value which identifies your transaction and may be assigned only once. If the transaction or action is submitted again with the same ReqID, Computop Paygate will not carry out the payment or new action, but will just return the status of the original transaction or action.

Please note that the Computop Paygate must have a finalized transaction status for the first initial action (authentication/authorisation). This does not apply to 3-D Secure authentications that are terminated by a timeout. The 3-D Secure Timeout status does not count as a completed status in which the ReqID functionality on Paygate does not take effect. Submissions with identical ReqID for an open status will be processed regularly.

Notice: Please note that a ReqID is only valid for 12 month, then it gets deleted at the Paygate.

ans..30

MerchantID, assigned by Computop

an32

ID assigned by Paygate for the payment, e.g. for referencing in batch files as well as for capture or credit request.

an32

ID for all single transactions (authorisation, capture, credit note) for one payment assigned by Paygate

ans..64

a..50

OK (URLSuccess) or FAILED (URLFailure)

ans..1024

an8

Error code according to Paygate Response Codes (A4 Error codes)

ans..30

MerchantID, assigned by Computop. Additionally this parameter has to be passed in plain language too.

an32

ID assigned by Paygate for the payment to be credited

ans..64

Amount in the smallest currency unit (e.g. EUR Cent). Please contact the Computop Helpdesk, if you want to capture amounts <100 (smallest currency unit).

a3

Currency, three letters DIN / ISO 4217, e.g. EUR, USD, GBP. Please find an overview here: A1 Currency table

an64

ans..32

To avoid double payments or actions (e.g. by ETM), enter an alphanumeric value which identifies your transaction and may be assigned only once. If the transaction or action is submitted again with the same ReqID, Computop Paygate will not carry out the payment or new action, but will just return the status of the original transaction or action.

Please note that the Computop Paygate must have a finalized transaction status for the first initial action (authentication/authorisation). This does not apply to 3-D Secure authentications that are terminated by a timeout. The 3-D Secure Timeout status does not count as a completed status in which the ReqID functionality on Paygate does not take effect. Submissions with identical ReqID for an open status will be processed regularly.

Notice: Please note that a ReqID is only valid for 12 month, then it gets deleted at the Paygate.

ans..30

MerchantID, assigned by Computop

an32

ID assigned by Paygate for the payment, e.g. for referencing in batch files as well as for capture or credit request.

an32

ID for all single transactions (authorisation, capture, credit note) for one payment assigned by Paygate

ans..64

a..50

OK (URLSuccess) or FAILED (URLFailure)

ans..1024

an8

Error code according to Paygate Response Codes (A4 Error codes)